This paper presents a monopitch timber truss roof, through the stages of its design, static calculation and execution. It is a structure that originally was not carried out in accordance with project documentation, and the realization of its restructuring failed to make the final form. It all lead to constructing a new roof structure. The intention...

By Žikica Tekić, Saša Đorđević, Aleksandra Nenadović

In the last few years there has been a significant progress in the adoption of technical regulations regarding recycled aggregate, which affects the facilitation and stimulation of its practical application. However, the new European regulations are still incomplete, and beside that, it is evident there is no harmonization between national standard...

By Vlastimir Radonjanin, Mirjana Malešev, Gordana Broćeta, Milka Grabež

A non‐linear elastic‐plastic Generalised Beam Theory (GBT) is formulated and used to investigate the buckling behaviour of aluminium and stainless steel thin‐walled members. The analysis consists of calculation cross‐section (local) and member (global) deformations and has been shown to be a very efficient tool for analyzing local and global stabil...

By Dijana Majstorović, Milorad Došenović, Nataša Mrđa, Dragan Milašinović

Metrological Laboratory of Civil Engineering, Institute of Geodesy and Geoinformatics, began work in 1985, and it is performed calibration of all types of instruments used in surveying. For the whole time of his work in the laboratory were tested and calibrated a lot of different measurands that are used in geodesy. In the aim to advance the work i...

By Siniša Delčev, Vukan Ogrizović, Jelena Gučević

Some considerations on influence of mode interaction on eigenshapes of the thin‐walled structures are given. Classic theory is limited on structures with non‐deformable cross section, so that for general analysis it was necessary to apply semi‐analytical finite strip method. Strip displacement field is approximated with sum of products of trigonome...

By Radomir Cvijić, Aleksandar Borković, Saša Tatar

The paper deals with defining outdoor spaces lounge potentials tipology, based on weak criteria, that could be applicable in the initial stages of the creative process. It is a kind of subjective typology, different from common typological researches. Lounge implies the subjective sense of relaxation based on body – environment relations. The...

By Ivan Živanović

This paper focuses on the importance of the preparatory course for taking up the qualifying examination in free‐hand drawing. It considers the significance of mastering graphic work methods and influence specific developed capabilities on a variety of achievements of candidates during the preparatory course and, in the end, the success of the quali...

By Maja Dodig, Ljubiša Preradović, Duška Milanović

Contemporary trends in the building development, which imply the preservation of the natural environment in terms of the proper disposal of natural resources, impose the exploited, recycled materials as an opportunity for sustainable solutions. This paper studies the technological processes and material resources of the production processes of aggr...

By Gordana Broćeta, Mirjana Malešev, Vlastimir Radonjanin

This paper treats the principle of static testing on braced girder of a sport hall built by the primary school "Srbija" in Pale. During testing simulated snow load was performed on the roof and was applied on a major steel braced (three‐band) roof grider, with span L = 23 m. The following measurements and observations were performed: measurement of...

By Dejana Jokić, Marina Latinović

The paper examines different heuristic an operational models in urban and regional planning, in planning of complex infrastructral projects but also in broader context of social sciences and administrative disciplines. Speciffically, it examines relations between positivist approach to heuristic, and approaches which are generally reffered to as ph...

By Ognjen Šukalo